Hanford Crews Nearly Ready To Seal Up Tunnel With Grout

Crews at the Hanford Site in southeast Washington state are running through rehearsals and last minute details. In early October, they’ll begin pouring grout, a kind of thin cement, into a partially collapsed tunnel full of highly contaminated radioactive waste.


“Tunnel 1” is connected to the PUREX plant, a mothballed plutonium processing factory. This past spring, the train tunnel partially collapsed causing an emergency at Hanford.

Now, the government has hired a contractor to fill the tunnel up with grout to stabilize it and keep it from collapsing further

This diagram shows how metal boxes are installed in the area of the tunnel that was breached and then filled with sand. The grout will run through the metal boxes in pipes to fill the tunnel. CREDIT CH2M HILL PLATEAU REMEDIATION COMPANY

 

It’s a major operation. The tunnel will take about 600 trucks of grout and about one month to fill up. It will all happen at night so the trucks don’t get stuck in traffic. 


Workers have installed pipes that run down into the tunnel and a scaffold over the tunnel they call “the bridge.”

The contractor doing the work, CH2M HILL Plateau Remediation Company, said the grout mixture will be warm, but not at temperatures that will be trouble for the radioactive waste. 



Critics of the plan worry that the federal government will never remove all this grout and the radioactive waste it encapsulates. They don’t want it to become a near-surface radioactive waste dump.

Copyright 2017 Northwest News Network. To see more, visit Northwest News Network.